BCMSY - ZYNOLYTE ENGINE ENAMEL
- MSDS: BCMSY
- Manufacturer: ZYNOLYTE PRODUCTS CO
- Product Name: ZYNOLYTE ENGINE ENAMEL
- National Stock Number: 8010-00N006428
Product Identification
Product ID:ZYNOLYTE ENGINE ENAMEL
MSDS Date:01/01/1985
FSC:8010
NIIN:00N006428
MSDS Number: BCMSY
Responsible Party
Emergency Phone: 213-321-4220
Cage: 25461
Contractor
Telephone: 310-513-0700
Cage: 25461
Ingredients
2-ETHOXYETHYL ACETATE (CELLOSOLVE ACETATE) (EGEEA)
CAS: 111-15-9
RTECS: KK8225000
Fraction By Weight: 2-5%
OSHA PEL S,100 PPM
ACGIH TLV: S, 5 PPM; 9192
METHYLENE CHLORIDE (SARA III)
CAS: 75-09-2
RTECS: PA8050000
Fraction By Weight: 40%
OSHA PEL 500 PPM/C,1000; Z2
ACGIH TLV: 50 PPM, A2; 9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
CHLORINATED HYDROCARBON SOLVENT
Fraction By Weight: 7-10%
ACGIH TLV: 100 PPM (MFR)
AROMATIC HYDROCARBON SOLVENT
Fraction By Weight: 5-9%
ACGIH TLV: 200 PPM (MFR)
ALIPHATIC HYDROCARBON SOLVENT
Fraction By Weight: 5-20%
ACGIH TLV: 500 PPM
Hazards
Effects of Overexposure:EYE: IRRITATION. VAPORS: ANESTHETIC
First Aid
First Aid:EYE: FLUSH WITH WATER 15 MINUTES,CONSULT PHYSICIAN.
INHALATION: REMOVE FROM EXPOSURE,GIVE ARTIF RESP IF NEEDED,CALL A
PHYSICIAN.
Fire Fighting
Flash Point:<20F/-6C
Extinguishing Media:FOAM,CARBON DIOXIDE,DRY CHEMICAL
Fire Fighting Procedures:SELF-CONTAIN BREATH APP, WATER FOG TO COOL
EXPOSED CONTAINER
Unusual Fire/Explosion Hazard:PRESSURIZED PRODUCT. EXPOSURE TO HIGH
HEAT MAY CAUSE BURSTING.
Accidental Release
Spill Release Procedures:SECURE SOURCES OF IGNITION. CONTAIN & PICK UP
WITH ABSORBENT AND NON-SPARKING TOOLS
Handling
Handling and Storage Precautions:DO NOT STORE ABOVE 120F/48C. DO NOT
SMOKE, ARC WELD, FLAME CUT OR BRAZE IN AREA OF USE.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
EXPOSURE OF CONCERN
Ventilation:LOCAL/MECHANICAL WITH EXPLOSION PROOF MOTORS.
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health
ADD INGREDIENT: ISOBUTANE/PROPANE PROPELLANT 25-30%.
Chemical Properties
Vapor Density:>1
Spec Gravity:0.098
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:85
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:TEMPS ABOVE 120F/48C
Hazardous Decomposition Products:HCL,PHOSGENE
Disposal
Waste Disposal Methods:COMPLY WITH LOCAL, STATE AND FEDERAL
REGULATIONS. DO NOT INCINERATE CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.